随动定向战斗部破片飞散特性研究

针对防空导弹常规破片式杀伤战斗部使用中存在能量利用率低的缺陷,提出采用随动定向战斗部的观点。建立随动定向战斗部的破片动态飞散区和飞散速度的计算模型,采用数值解析方法,解决在复杂弹目交会条件下破片的飞散区域与打击速度的计算问题．并用MATLAB软件对建立的模型进行验证,得出仿真结果与实际结果一致,这表明模型是合理、正确的。     

圆柱形装药驱动轴向预制破片飞散特性

为了增强柱形战斗部轴向威力,在无壳柱形战斗部底面布置单层离散的预制破片。开展圆柱形TNT装药驱动轴向预制破片飞散试验,获得预制破片的最大初速、飞散角等特征参数;运用LS-DYNA软件对装药驱动预制破片过程进行数值模拟,阐述预制破片群飞散过程;对装药驱动整体平板理论计算公式进行改进,获得预制破片的最大初速。结果表明:破片初速理论计算结果、数值计算结果和试验结果吻合良好;随着与装药底部中心距离的加大,破片初速、径向飞散角分别近似呈“抛物线”减小、增大;试验实测、理论计算得到的破片最大初速值超过2500 m/s,试验实测的径向飞散角最大约为22°,而周向飞散角则普遍较小,均值在5°以内。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

基于到达时差法的目标定位系统

运用声被动定位理论探索空中目标的定位问题。建立了一种平面波声被动定位模型,利用简易被动声传感器阵列,分析并设计了定位系统的总体结构。提出了一种简易的计算到达时差电路设计方案,此电路利于目标的实时定位。在利用这种系统定位远距离目标时,可消除有效声速的影响。最后给出了几组实验结果,证明了此系统的可行性,但对近距离目标的定位结果较差,模型需进一步研究。     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。     

弹丸初速对磁阻型线圈发射器发射性能的影响分析

通过设置弹丸初速并研究其对单级磁阻型线圈发射器发射性能的影响,模拟分析前一级线圈弹丸出口速度对后一级线圈发射性能影响的规律;利用Ansoft有限元仿真软件进行了动态仿真,得到弹丸初速对单级磁阻型线圈发射器驱动电流、驱动线圈感应电压、电磁力、弹丸出VI速度、弹丸位移及能量转换效率等影响的规律．研究表明：弹丸初速越大,经过单级线圈加速后弹丸出口速度也越大,但弹丸出口速度增量减小;随着弹丸初速增大,能量转换效率呈现先增大后减小的趋势．     

基于效能的舰艇电子对抗训练效果评估方法

摘 要：为解决舰艇电子对抗专业训练缺乏统一评估标准与方法体系等实际评估难题;采用系统分析方法结合舰艇电子对抗专业训练实际;研究提出了基于“任务要求分解”的作战效能量化指标体系构建方法、训练效果表达方法及实用评估指标体系、定量指标评估模型、评估标准等舰艇电子对抗训练效果评估方法体系;能够满足专业训练效果评估所需,对其它专业军事训练效果评估工作亦具有借鉴意义。     

基于电磁涡旋的雷达目标成像

作为信息载体的电磁波除了传统的携带信息方式外,近年来其波前以电磁涡旋形式展现的信息调制能力也越来越受到关注。本文综述了电磁涡旋在信息调制等方面的研究进展,阐述了其在雷达信息获取方面的潜在应用价值。针对圆形相控阵列,建立了电磁涡旋波照射下理想点散射目标的回波模型。将各阵元的接收信号按照与发射时相同的模式移相后,沿圆周积分即可获得雷达阵列的输出回波。该回波可表示为经平方Bessel函数调幅后的傅里叶基函数的线性组合。结合Bessel函数的频谱特性,分析了轨道角动量态与方位角变量之间的近似对偶关系,利用逆投影和滤波-傅里叶变换方法进行了成像处理。仿真实验表明,电磁涡旋对雷达目标具有方位向成像的潜力。本文的研究可为新体制的雷达设计、目标识别技术的发展提供参考和借鉴。     

稀薄气体动理论中介观尺度数值模拟的加速方法

针对滑移流、早期过渡流区域采用离散速度法(discrete velocity method, DVM)求解Boltzmann方程收敛速度极慢、计算资源消耗大的难题,提出全流场耦合介观/宏观方程加速方法。在介观层面基于有限差分的DVM求解Boltzmann方程,在宏观层面基于有限体积的压力耦合方程组半隐式方法求解矩方程,充分利用纳维-斯托克斯-傅里叶/R26矩方程在低克努森数下的快速收敛特性,对介观方程进行加速。基于高阶Hermite多项式重构分布函数,完成宏观方程与介观方程之间的数据传输。仿真结果表明:全流场耦合介观/宏观方程的加速方法在滑移流、早期过渡流区域具有显著加速性能,最大降低了95.28%的计算时长;但对中、大克努森数流域,加速性能大幅度下降。     

Investigations on influence of rifle automatics system action on values of energetic efficiency coefficient of muzzle brakes

The objective of the paper was to compare values of the muzzle brake efficiency coefficient for a rifle with active or inactive automatics systems. Special laboratory stand designed for investigating the recoil process was used. The motion of the rifle was detected by the use of the laser interferometer and the optical camera. The recoil velocity time courses were determined by smoothing and differentiation of experimental position records. The results of the experiments indicated that in the case of an active automatics system two values of the recoil velocity can be used for calculation of the energetic efficiency coefficient: the maximum recoil velocity and the final recoil velocity at the end of the automatics action cycle. The values of the coefficient, calculated using these two values of the recoil velocity, distinctly differ. However, it was shown that their values indicate the same relation between the efficiency of various muzzle brakes. The value of the efficiency coefficient, determined on the basis of the final recoil velocity value, is practically the same as that determined on the basis of the final recoil velocity value for the rifle with an inactive automatics system.